JConcepts 2012 Chevy Silverado 1500 SCT - Hi-Flow body (0200)

By slashproducts at April 23, 2012 20:17
Filed Under: JConcepts Products


0200 -Illuzion - 2012 Chevy Silverado 1500 SCT - Hi-Flow body.

Wherever you are, you'll see a Chevy Silverado on the job. Chevy Silverado and JConcepts - work hard, play hard. Like a rock. Never one to relax, JConcepts introduces the 2012 Chevy Silverado 1500 SCT body. Starting with its low-profile design, beefy fenders and noteworthy Silverado appearance, the 1500 SCT body is inspired by the looks of a class leading full-size pick-up, loaded with performance and Hi-Flow features. Fitting on 6 different trucks as a direct fit and over 9 different vehicles overall, the Chevy 1500 is just what you have been looking for.

The air escape package on the Silverado consists of user friendly trim-out areas which have been strategically placed to ensure a clean race-able look that minimizes the trouble-some parachute effect. The large Hi-Flow areas are depressed into the body which allows the user to simply score the bottom pocket and pop-out for instant results. The Hi-Flow, reverse, hood-scoop, used predominantly as an under air release feature, blends beautifully into the sculpted extra-clearance fenders while releasing the front end of inner pressure.

Whether you start your day on the race track or in the back-yard, the Silverado packs a serious punch straight out of the package. The head-light and grill treatment scream Chevrolet while the extruded fenders and detailed body panel trim section brings a 3rd dimension to the vehicle’s appearance. X-braced, roll-bar appearance features highlight a terraced rear bed area while stylish number and name plates finish off the body giving it that authentic short course look.

The 2012 Chevy Silverado Runs Deep.


  • Officially licensed by General Motors to JConcepts
  • 1:1 Chevy Silverado inspired design
  • Original JConcepts short course Hi-Flow styling
  • Hi-Flow regions to minimize parachute affect
  • Racing inspired body, cab and window design
  • Aggressive headlight and grill treatment
  • Performance enhanced number and name plates with mounting hardware
  • Front and rear fender flares for maximum clearance
  • Clear polycarbonate with protective film
  • Window masks and detailed Chevy decal sheet

General Motors Trademarks used under license to JConcepts, Inc.

Revo®, JATO™, T-MAXX™, SLASH®, SLASH 4X4® etc. are trademarks and registered trademarks of Traxxas L.P.

COST: $35.70


RPM Low Visibility Wheelie Bars

By slashproducts at April 23, 2012 20:12
Filed Under: RPM Products


Low Visibility Wheelie Bars for the Traxxas Slash 2wd and Slash 4x4 from RPM (81312).

A serious issue with most currently available wheelie bars is the inability to use the truck as an off-road vehicle because most wheelie bars tend to stick out too far behind the truck. The RPM Low Visibility Wheelie Bar solves that problem!

Since our wheelie bar and included wheels sits inside the protection of the rear bumper, they don’t stick out allowing the truck to function normally when rippin’ up the local track, yet still do their job when the occasional heavy finger pull yanks the front wheels off of the ground! The RPM Low Visibility Wheelie Bar design bolts directly to all RPM Slash bumpers (both 2wd and 4x4) at the mud flap mounts, while still allowing the use of RPM Mud Flaps (RPM #81012)!

The RPM Wheelie Bar stays tucked up behind the rear bumper, yet sitting low enough to allow the wheels to touch down once the front end starts catching some serious air! Now any Slash owner can pull some sick wheel stands without the fear of grinding crucial rear bumper support components into dust! RPM Low Visibility Wheelie Bars are sold ready to install on an RPM Rear bumper (sold separately) with all necessary mounting hardware and complete instructions for assembly.

RPM Low Visibility Wheelie Bars are manufactured from our trademark blend of incredibly strong nylons and backed by our limited lifetime warranty again breakage.


RPM Low Visibility Wheelie Bars are designed for use with RPM Slash 2wd and Slash 4x4 rear bumpers exclusively and will not work with stock Traxxas Slash rear bumpers.

COST: $9.95


Racer’s Edge Machine Front Shock Tower for the Traxxas Slash

By slashproducts at January 16, 2012 03:25
Filed Under: Racer's Edge Machine Products


Machined out of Billet T6-6061 Aluminum. Will work with any shock up to 1" thick which allows the use of T-Maxx shocks. 0.200" (5mm) Thick to handle Extreme Abuse. Designed to work with stock or after-market front bulkheads.12 shock mount locations and 5 camber link mount locations for the ultimate in tuning your suspension.1/4" aluminum shock standoffs. All mounting hardware included. Uses Roll-Form Taps making threads 60% stronger than standard threads.

PRICE: $20.00


Dynamite DYN7935 Aluminum 17MM Wheel Adapter

By slashproducts at February 06, 2011 06:21
Filed Under: Dynamite Products


Dynamite DYN7935 Aluminum 17MM Wheel Adapter (4), BL: SLASH, RU, ST

Allows mounting of 1/8 scale buggy wheels to Traxxas trucks such as the Slash and Rustler.

4 adapters per package

COST: $33.95

ProLine Traxxas Slash Ford F-150 Clear Body

By slashproducts at July 22, 2010 16:27
Filed Under: ProLine Racing Products

  fordf1502fordf150 fordf1501

Ford® fans here comes your off-road Short Course body with 2010 styling! The Pro-Line Ford® F-150™ race body for your Traxxas® Slash®, Slash® 4x4 or Associated SC10 (SC10 fits with additional trimming required).


  • Bold off-road Short Course (SC) styling
  • Extremely pronounced fenders for an attack-like stance
  • Exceptional detail and style
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:
    1.) Clean Body and apply included window mask
    2.) Paint then peel the over-spray film off
    3.) Sticker your body (decal sheet included)
    4.) Mount your new Ford® F-150 onto your Slash®, Slash® 4x4, SC10 (with trimming) or other short course truck
  • Made in the USA

What’s Included:

  • Clear Ford® F-150 body
  • Window templates
  • Decal Sheet

COST: $29.25



REM Slash 4X4 Front & Rear Suspension Arms

By slashproducts at July 18, 2010 06:19
Filed Under: REM Products


* Made from Billet 6061-T6 Aluminum for
strength and light weight.
* Perfect fit with stock or after-market parts
* Stock Length
* All hardware included for installation
* Already set up for sway bar kit
* weighs only 1.4 oz per arm

COST: $24.00


* Made from Billet 6061-T6 Aluminum for
strength and light weight.
* Perfect fit with stock or after-market parts
* Stock Length
* All hardware included for installation
* Already set up for sway bar kit
* weighs only 1.4 oz per arm

COST: $24.00

Traxxas Slash Team Replica Bodies

By slashproducts at July 14, 2010 06:26
Filed Under: Traxxas

Officially Licensed Team Replica Bodies
for Traxxas Slash and Slayer


Straight from the track to your workbench! Traxxas’ new race-team replica bodies are fully licensed for authentic good looks. All the major decals and graphics are factory applied to duplicate the signature style of short-course racing’s top drivers, and additional decals are included to finish off your replica shell as a Pro 2WD or Pro 4WD machine. The bodies are pre-trimmed for speedy installation with just a reamer; mounting dimples make it easy to select the correct post locations for Slash® and Slayer®. Available body styles include Rick Huseman’s Fabtech® and the Amsoil® trucks of Scott Douglas and Mike Oberg.


  • Factory fit for Traxxas Slash and Slayer
  • Graphics and decals are pre-applied
  • Additional decals provided to duplicate Pro 2WD and Pro 4WD trucks
  • All logos and graphics are officially licensed for authentic style
  • Pre-trimmed for easy mounting
  • Locations marked for Slash and Slayer body posts
  • Durable 0.040 Polycarbonate


Hot Video


Comment RSS

Follow Us On Twitter